Customized DIY wooden TV body tutorial for ANY tv.
This simple body for the TV is one other a kind of DIY tasks that I’ve
needed to deal with for fairly a while!
I do know, I do know…a body for the TV? However I believe you will be shocked on the
distinction it makes.
This works for most latest flat display screen TVs, however there are some things
to think about that I will cowl on this submit.
I lastly labored on this as a result of my husband bought an even bigger tv for
our household room. Our previous one was a dinosaur and he and my son had been speaking
a couple of bigger measurement for years.
My solely request was that it’s a “Body” TV — I’ve admired them endlessly and
knew one would look superb in our household room!
This submit might comprise affiliate hyperlinks on your comfort.
The Body TVs are made with a extra matte display screen and a a lot thinner body
across the edge.
The most effective half is you may load your individual digital artwork and pictures or buy
choices on-line (I will discuss extra about that in a second).
towards the wall so it really appears like actual artwork. (Though for now we’re
utilizing our previous mount, we have been attempting to get this factor up earlier than the Tremendous
Bowl.) 😂
This Samsung Body TV goes on sale the entire time, so look ahead to that if
you are !
General this factor is a decorator’s dream come true. 🙂
It comes with a easy black body, however there are a TON of ornamental body
choices on-line for this TV that costume it up and actually make it appear like a
piece of artwork.
I knew I might make one thing for a fraction of that value.
Collect your supplies
I gathered my wooden trim first.
This half is totally as much as the look you need — I needed my DIY body to
cowl a pair issues particularly.
I used this nook trim from Lowe’s for my mission as a result of it overlapped the
entrance of the body on the TV:
in my view.
Plus, I would like my TV body to cowl the edges of the tv as nicely, at
least a bit.
In case you do not see the edges of your TV a lot and simply need to cowl the entrance
encompass, this mission will probably be even simpler!
Whenever you select your trim there are two belongings you need to test (particularly
for a mission like this).
First, lay the items out on the ground and ensure they are not bent. Decide
them up and look down every one to verify they’re straight:
You will be shocked at what number of items are wonky and bent.
If I am nailing them to a wall, it is simpler to repair minor bends. However for
one thing like this that was going to hold freely, I wanted them as straight
as doable.
Additionally, when you’ll be staining like I did, ensure that to test the grain on every
piece.
Though these are each pine, they’d look totally different when stained
due to the grain:
It could be slight, however noticeable.
This is not one thing I all the time have a look at — if it is for wooden cabinets that
aren’t proper subsequent to one another, I do not fear as a lot.
However for this body the place the sections will probably be touching, I needed the wooden
grain to be comparable.
In case you’re utilizing fundamental wooden strips, this subsequent half will probably be a lot simpler!
Since I used to be utilizing this ornamental trim that was very skinny, I needed to come up
with a substitute for nails for the meeting.
I went with these easy metallic nook braces:
I made certain that the scale of the bracket matched the again a part of the wooden
trim.
to make use of for the set up:
In case you’re wooden trim is thicker than this, you should utilize quite a lot of methods to
make your body:
-
Staples — staple the corners collectively (I like to recommend utilizing wooden glue as
nicely.) -
Glue with clamps — wooden glue will work, however ensure that to clamp them
whereas drying. If glue is all you employ, watch out as you progress the body
round because it wobbles a bit. - Nails — wooden glue and a nail gun are your finest guess!
-
Braces or brackets — that is what I used as a result of my trim was a bit
delicate. Even glue would not assist a lot as a result of the wooden items do not
have a lot contact space.
Easy methods to assemble your TV body
Measure each the width and top of your TV to get the lengths on your
trim items.
I needed to miter my corners (lower them at a forty five diploma angle) due to the
trim design, however you might forego this when you’re utilizing easy flat or
sq. wooden items.
Both approach, guarantee you will have good corners identical to the TV!
This factor is superior as a result of it holds the 2 items of trim tight collectively
on the good angle.
This nook clamp will probably be particularly useful when you’re utilizing glue, staples
or nails!
If my molding had only a bit thicker, I might have hidden the brace inside
like this:
However I had to make use of the thickest half across the edge. I forgot to take a photograph
as I used to be working, so right here you go:
Ha!
as a result of it is uneven beneath, you will have to prop up the extra shallow half
with some scrap wooden:
In case you simply lay it flat on the noticed, it will not meet up at an ideal angle in
the corners.
This trick evens it out as you chop:
I used the small screws to connect the braces to the bottom of the molding
in every nook.
Drilling a pilot gap is VERY essential, particularly when working with extra
delicate trim like mine. Then I drilled the quick screws in very slowly to keep away from the wooden splitting.
End your body with stain or paint
In spite of everything 4 corners have been related, my body was full!
I examined it out on the TV and needed to regulate the size of 1 facet only a
bit, however then it match like a glove.
so I stained it in
Special Walnut by Minwax, then put a coat of polyurethane on high:
favorite stainable wood filler, however as a result of I used the pure coloration I did not even should stain over
once more. It blends proper in.
The nice half about this mission is you may customise this nevertheless you
need! If you’d like one thing extra ornate you should utilize a thicker, extra detailed
molding.
Rub ‘n Buff wax
to create a extra conventional previous world look, or paint or stain like I mine
for a transitional/fashionable design.
Ending touches
My body match comfortable across the TV, however I added a command strips on the high and
backside of the body for a bit additional safety since we angle our TV down
only a bit:
Skinny strips of Velcro would work nicely for this as nicely!
This DIY body is sturdy when it is up on the TV, however take care when eradicating
it or readjusting. Something this skinny and enormous will want some care when
dealing with.
This is a have a look at the distinction this wooden body made across the TV:
It is barely noticeable, however I needed to accommodate a small sensor on the
backside of the TV.
You will need to test your TV for a sensor anyplace across the edge. This TV
would not have a sensor for the on and off operate, but it surely does have a movement
sensor that turns the artwork on and off.
I notched only a bit out of the body for that, however I am undecided I will want
to maintain it. As we use the TV I will decide if we wish the movement sensor on
or not. (If we do not, I will in all probability connect a brand new backside piece of molding.)
You may both lower a bit out of your trim like I did, or use a drill bit
to make a gap in your body on the location of your sensor.
the TV disappears anyway:
has a tremendous choice of beautiful Body TV artwork!
This cloud artwork is one among my favorites:
You may change the mat measurement and coloration for any picture. I like this medium
sized mat so much:
However this skinnier model is fairly as nicely:
The mat offers it a extra conventional look, however you may have the picture fill
the display screen for a extra fashionable design.
A few of the digital artwork has a mat already, so there is not any want so as to add one:
After all, you may add household or private pictures to show as
nicely.
The DIY wooden body on the TV is the right of entirety and I LOVE
IT!
A fairly TV?? It is like my adorning goals have come true! 🙂
This tutorial is not only for the precise Body tv! I just lately made one other TV body, this time for an older, non-“body” tv that we have now in our bed room:
For this one, I went with wooden trim that is a bit more ornamental and I like it!:
To construct this black TV body, I used a chunk of wooden (known as “pine cease” at Lowe’s) that measures half an inch by 3/4 inch, together with the ornamental trim for the entrance.
I nailed and glued the plain 3/4 trim onto the again of the ornamental wooden molding:
I did this so the again wooden piece would relaxation across the TV.
In any other case I used the identical course of as earlier than with the “L” brackets to construct the entire body.
It turned out so fairly! I really like the extra detailed trim work I used on this one.
One factor to think about: I might warning towards masking any vents round
your TV.
Older flat screens had that greater than newer variations. In case you’re simply attaching
the light-weight body to the entrance of your TV, or utilizing small trim like I did,
that will not be a problem.
Now to determine if I need to cowl our middle speaker. Hmmmm.
Humorous factor is, I do not discover it almost as a lot now with the brand new TV. It appears
to vanish greater than earlier than and I believe masking it might carry much more
consideration to it.
My wooden body for our tv was $35 — $30 for the molding and $5 for the
screws and braces.
I saved round $130 by making this myself!
This “artwork” TV has already fooled one among our visitors who thought we had eliminated the TV!
If in case you have any questions on this DIY body on your TV, let me know within the
feedback.
Trending Merchandise
